TP-Link TL-WA5210G - Operation Mode Setting

5
Operation Mode Setting
2
A. Configuration for AP Client Router Mode
This page will then display.
This page will then display.
The AP supports three operation mode types: AP Client Router,
A
P Route
r
and AP.
a) If you want to connect to your WISP, please choose
A
P Client Route
r
mode and proceed to AǗ
b) If you want to set it as a router, please choose AP Router mode, and fo
r
further configuration, please refer to the user guide in the resource CD;
c) If you want to set up a point-to-point connection with TL-WA5210G,
please skip to B;
If you want to set it as a repeater, please skip to C.
Note
Click Next
The Username and Password are provided by your WISP.
Note
Click Next
Choose the Operation Mode Type
appropriate to your needs
Enter the Username and Password
given by your WISP
Click Next
Click Next
Choose your WAN Connection
Type provided by your WISP. Here
we choose PPPoE as an example