the default values and click OK.
Note
If the dialog box does not pop up, please refer to T3 in the Troubleshooting
guide. T2 will give you some help if you forget the password.
The web management page will
display after successfully logging in.
Note
You will need to assign your computer a Static IP address within the same
range as the AP’s IP address. See the Troubleshooting T3 if you need
assistance.
User name: admin
Password: admin
Click OK
Configuring the device
3
Click Quick Setup
Open your web browser and type
http://192.168.1.254 in the address
bar and press Enter
To Next Page
Loading...
