EasyManua.ls Logo

TP-Link TL-WR941HP

TP-Link TL-WR941HP
188 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
90
TL-WR941HP
450Mbps High Power Wireless N Router
2) Static IPv6
Figure 3-79 Static IPv6
IPv6 Address - Enter the IPv6 address in dotted-decimal notation provided by your ISP.
Default Gateway - Enter the default gateway in dotted-decimal notation provided by your
ISP.
MTU Size - The normal MTU (Maximum Transmission Unit) value for most Ethernet
networks is 1500 Bytes. For some ISPs, you may need to modify the MTU. But this is rarely
required, and should not be done unless you are sure it is necessary for your ISP
connection.
Primary DNS - Enter the DNS IPv6 address in dotted-decimal notation provided by your
ISP.
Secondary DNS - Enter another DNS IPv6 address in dotted-decimal notation provided by
your ISP.
Note:
If you get Address not found error when you access a Web site, it is likely that your DNS servers
are set up improperly. You should contact your ISP to get DNS server addresses.
Address Autoconfiguration Type RADVD (Router Advertisement Daemon) and

Other manuals for TP-Link TL-WR941HP

Related product manuals