65
450Mbps High Power Wireless N Router
2. Click “Advanced→Access Control→Schedule” on the left to enter the Schedule Settings
page. Click Add New... button to create a new schedule with Schedule Description is
Schedule_1, Day is Sat and Time is all day-24 hours.
3. Click “Parental Controls” menu on the left to go back to the Add or Modify Parental
Controls Entry page:
1. Click Add New... button.
2. Enter 00-11-22-33-44-AA in the MAC Address of Child PC field.
3. Enter “Allow tp-link” in the Website Description field.
4. Enter “www.tp-link.com” in the Allowed Website Name field.
5. Select “Schedule_1” you create just now from the Effective Time drop-down list.
6. In Status field, select Enable.
4. Click Save to complete the settings.
Then you will go back to the Parental Control page and see the following list.
3.4.10 Access Control
There are four submenus under the Access Control menu: Rule, Host, Target and Schedule.
Click any of them, and you will be able to configure the corresponding function.
3.4.10.1. Rule
Go to “Advanced→Access Control→Rule”, and then you can view and set Access Control
rules in this page.
To Next Page
Loading...
