23
450Mbps High Power Wireless N Router
Network Name (SSID) - Create a name (up to 32 characters) for your wireless network. If
the Hide SSID checkbox is selected, the SSID of your wireless network will be hidden from
the Wi-Fi network.
Password - Create a password for your wireless network. The password must have a
minimum of 8 characters in length.
Click the Save button to save your settings.
3.3.4 Guest Network
Choosing menu “Basic→Guest Network”, you can configure the basic setting for guest
Network.
Figure 3-9 Guest Network
Allow Guests To Access My Local Network - Click ON/OFF to enable or disable this
feature. If enabled, guests can communicate with hosts.
Wireless - Click ON/OFF to enable or disable your Guest network. If enabled, the wireless
stations will be able to access the Router, otherwise, wireless stations will not be able to
access the Router.
Network Name(SSID) - Create a name (up to 32 characters) for your Guest network. The
same Name(SSID) must be assigned to all wireless devices in your Guest Network.
Password - Create a password for your wireless network. The password must have a
minimum of 8 characters in length.
Click the Save button to save your settings.
3.4 Advanced
Click “Advanced”, then you will see the main menus on the left of the Web Management Page.
On the right, there are the corresponding explanations and instructions.
To Next Page
Loading...
