154
450Mbps High Power Wireless N Router
5.3.6 System Tools
Go to “System Tools”, and then you can see the submenus under the main menu: LED
Control, Time settings, Diagnostic, Firmware Upgrade, Factory Defaults, Backup &
Restore, Reboot, Password and System Log. Click any of them, and you will be able to
configure the corresponding function. The detailed explanations for each submenu are provided
below.
5.3.6.1. LED Control
Go to “Setting→System Tools→LED Control”, and then you can turn On or Off the LEDs on
your router according to a specific time schedule.
Figure 5-21 LED Control
Night Mode - Indicates whether the Night Mode is On (enabled) or Off (disabled).
LED Off Time - Select the time schedule to turn off LEDs.
5.3.6.2. Time Settings
Go to “Setting→System Tools→Time Settings”, and then you can configure the time on the
following screen.
To Next Page
Loading...
