EasyManua.ls Logo

TP-Link TL-WR941HP

TP-Link TL-WR941HP
188 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
84
TL-WR941HP
450Mbps High Power Wireless N Router
Figure 3-74 No-ip.com DDNS Settings
To set up for DDNS, follow these instructions:
1. Enter the User Name for your DDNS account.
2. Enter the Password for your DDNS account.
3. Enter the Domain Name you received from dynamic DNS service provider.
4. Click the Login button to login to the DDNS service.
Connection Status - The status of the DDNS service connection is displayed here.
Click Logout to log out the DDNS service.
Note:
If you want to login again with another account after a successful login, please click the
Logout button, then input your new username and password and click the Login button.
3.4.17 IPv6 Support
There are two submenus under the IPv6 Support menu: IPv6 Status and IPv6 Setup. Click
either of them, and you will be able to scan or configure the corresponding function. The
detailed explanations for each submenu are provided below.

Other manuals for TP-Link TL-WR941HP

Related product manuals