120
450Mbps High Power Wireless N Router
Figure 4-13 Wireless Statistics
Rate - The Throughput unit.
Run Time – The time this function is running.
Transmit – Wireless transmit rate information.
Receive – Wireless receive rate information.
Click the Start button to start wireless throughput monitor.
Click the Stop button to start wireless throughput monitor.
4.3.4 DHCP
There are three submenus under the DHCP menu: DHCP Settings, DHCP Client List and
Address Reservation. Click any of them, and you will be able to configure the corresponding
function.
To Next Page
Loading...
