96
450Mbps High Power Wireless N Router
Go to “System Tools”, and you can see these submenus under the main menu: LED Control,
Time Settings, Diagnostic, Firmware Upgrade, Factory Defaults, Backup & Restore,
Reboot, Password, System Log and Statistics. Click any of them, and you will be able to
configure the corresponding functions. The detailed explanations for each submenu are
provided below.
3.4.18.1. LED Control
Go to “Advanced→System Tools→LED Control”, and then you can turn On or Off the LEDs
on your router according to a specific time schedule.
Figure 3-83 LED Control
Night Mode - Indicates whether the Night Mode is On (enabled) or Off (disabled).
LED Off Time - Select the time schedule to turn off LEDs.
3.4.18.2. Time Settings
Go to “Advanced→System Tools→Time Settings”, and then you can configure the time on
the following screen.
To Next Page
Loading...
