TP-Link TL-WR941HP

116
TL-WR941HP
450Mbps High Power Wireless N Router
4.3.3.3. Wireless MAC Filtering
Go to “Setting→Wireless→Wireless MAC Filtering”, and then you can control the wireless
access by configuring the Wireless MAC Filtering function.
Figure 4-9 Wireless MAC Filtering
To filter wireless users by MAC Address, click Enable. The default setting is Disabled.
 MAC Address - The wireless station's MAC address that you want to access.
 Status - The status of this entry, either Enabled or Disabled.
 Description - A simple description of the wireless station.
To Add a Wireless MAC Address filtering entry, click the Add New… button. The "Add or
Modify Wireless MAC Address Filtering entry" page will appear.
Figure 4-10 Add and modify Wireless MAC Address Filtering entry
To add or modify a MAC Address Filtering entry, follow these instructions: