10
450Mbps High Power Wireless N Router
1. Turn off the modem, and remove the backup battery if it has one.
2. Connect the modem to the Internet port on the router via an Ethernet cable.
3. Turn on the router.
4. Put the battery back, turn on the modem and wait about 2 minutes for it to restart.
5. Connect your devices to the router and check the LED lights.
Wired: Connect your computer to the router (LAN port) via an Ethernet cable.
Wireless: Connect wirelessly by using the SSID (network name) and password printed on
the bottom label of the router.
To Next Page
Loading...
