30
450Mbps High Power Wireless N Router
Primary DNS/Secondary DNS - If your ISP does not automatically assign DNS addresses
to the router during login, please click “Use the following DNS servers” check box and
enter the IP address in dotted-decimal notation of your ISP’s primary DNS server. If a
secondary DNS server address is available, enter it as well.
Click the Save button to save your settings.
4. If your ISP provides Bigpond Cable connection, please select Bigpond Cable option. And
you should enter the following parameters.
User Name/Password - Enter the User Name and Password provided by your ISP.
These fields are case-sensitive.
Auth Server - Enter the authenticating server IP address or host name.
Auth Domain - Type in the domain suffix server name based on your location, e.g.
NSW / ACT - nsw.bigpond.net.au
VIC / TAS / WA / SA / NT - vic.bigpond.net.au
QLD - qld.bigpond.net.au
Click Connect to connect immediately.
Click Disconnect to disconnect immediately.
Click Save to save all your settings.
5. If your ISP provides L2TP connection, please select L2TP/Russia L2TP option.
To Next Page
Loading...
