47
450Mbps High Power Wireless N Router
Figure 3-30 Guest Network Wireless Settings
Allow Guest To Access My Local Network - If enabled, guests can communicate with
hosts.
Enable Guest Network Bandwidth Control - If enabled, the Guest Network Bandwidth
Control rules will take effect.
Egress Bandwidth For Guest Network - The upload speed through the WAN port for
Guest Network.
Ingress Bandwidth For Guest Network - The download speed through the WAN port for
Guest Network.
Enable Guest Network – If enabled, the Guest Network function will take effect.
Network Name - Enter a value of up to 32 characters. The same Name (SSID) must be
assigned to all wireless devices in your Guest Network.
Wireless Security - You can choose the security type of Guest Network here.
Version - You can choose the version of the WPA/WPA2-Personal security on the
drop-down list. The default setting is WPA2-PSK.
To Next Page
Loading...
