102
Chapter 14
Quality of Service
14. 3. Configure Flow Classification
This page allows you to add classification rules to choose certain kind of packages
to enter a queue. The classification of packages is based mainly on the differences of
data link layer header, network layer header, transport layer header and so on.An option
should be empty if you don’t want to use it for a classification.
1. Visit http://tplinkmodem.net or http://192.168.1.1, and log in with the password you
set for the modem router.
2. Go to Advanced > QoS > Flow Classification
3. Click Add to enter new information and configure more settings.
To Next Page
Loading...
