6
Chapter 1
Get to Know About Your Modem Router
Some Common LEDs Explanation
LED Status Indication
(USB)
On The USB device is identified and ready to use.
Flashing A new USB device is being identified, or data is being transferred.
Off No USB device is plugged in to the USB port.
Note:
1. If the DSL LED is off, please check your Internet connection first. Refer to Connect the Hardware for more information
about how to make Internet connection correctly. If you have already made a right connection, please contact your ISP
to make sure your Internet service is available now.
2. If the Internet LED is off, please check your DSL LED first. If your DSL LED is also off, please refer to Note 1. If your DSL
LED is ON, please check your Internet configuration. You may need to check this part of information with your ISP and
make sure everything have been input correctly.
3. If the 4G LED is off, please check your Internet LED first. If the Internet LED is also off, please check your internet
connection. If you have already made a right connection, please contact your ISP to make sure your 4G network service
is available.
1. 2. 2. The Back Panel
The following parts (view from left to right) are located on the back panel.
Some Common Buttons and Ports Explanation
Item Description
DSL
For connecting the modem router to the Internet. Connect the port to the
splitter or directly connect the port to the phone jack via a phone cable. For
details, please refer to Get to Know About Your Modem Router.
To Next Page
Loading...
