7
Chapter 1
Get to Know About Your Modem Router
Item Description
LAN1, LAN2, LAN3,
WAN Ports
For connecting the modem router to your PC or other Ethernet network
devices. In wireless router mode, the WAN port is used for connecting to a
Cable/FTTH/VDSL/ADSL device.
Phone
For connecting your analog phone to the modem router. Note that you can
only connect to two ports (one to a Phone1 and the other to a Phone2) at
most.
POWER
For connecting the modem router to power socket via the provided power
adapter.
USB Port For connecting to a USB storage device.
ON/OFF The switch for the power. Press it to power on or off the modem router.
RESET
Press and hold this button for at least 5 seconds until all LEDs blink to reset
the router to its factory default settings.
WiFi Press the button to turn both 2.4GHz and 5GHz Wi-Fi on or off.
WPS Press the button to start a WPS synchronization.
To Next Page
Loading...
