42
Chapter 6
Customize Your Network Settings
4. Enter the MAC Address of the device for which you want to reserve IP address.
5. Specify the IP address which will be reserved by the router.
6. Select the Enable This Entry check box and click OK to make the settings effective.
6. 1. 5. Condition Pool
Condition Pool is used to configure IP address pools for certain devices or is used under
the guidance of your device provider. The table displays the corresponding parameters
of all the condition pools.
Follow the steps below to add a condition pool.
1. Visit http://tplinkmodem.net or http://192.168.1.1, and log in with the password you
set for the modem router.
2. Go to Advanced > Network > LAN Settings page, and select IPv4.
3. Click Add.
4. Give a description to the condition pool in the Device Name field.
5. Enter a value to identify the Vendor ID and functionality of the DHCP client.
6. Enter the Starting/Ending IP Address to decide the IP address range the DHCP
server can assign to clients.
To Next Page
Loading...
