10
Chapter 2
Connect the Hardware
Connect the DSL line and power adapter. The electrical outlet shall be installed near the
device and shall be easily accessible.
ON/OFF POWER RESET USB PHONE LAN3 LAN2 LAN1 WA N DSL
Phone Cable
2
Phone Cable
Phone Jack
1
DSL Splitter
LINE
PHONE MODEM
Power On DSL On
3
Push in to
turn on the
modem
router.
Power Adapter
b. Used as a wireless router
If you already have a modem or your internet comes via an Ethernet jack on the wall, you
can set up the modem router as a regular wireless router to share the internet.
Find the WAN port on the modem router, and connect it to your existing modem or the
Ethernet jack on the wall. Then connect the power adapter and turn on the modem
router. If you connect an existing modem, reboot it to get the modem router connected
to the internet.
To Next Page
Loading...
