TP-Link VX230v - Page 52

47
Chapter 6
Customize Your Network Settings
Company’s Server
My PC
Switch
LAN: 192.168.1.1
192.168.1.100
LAN: 192.168.1.2
WAN: 172.30.30.100
172.30.30.1
Modem
Router A
Modem
Router B
1. Make sure the routers use different LAN IP addresses on the
same subnet. Disable Modem Router B’s DHCP function.
2. Visit http://tplinkmodem.net or http://192.168.1.1, and log in
with the password you set for the Modem Router A.
3. Go to Advanced > Network > Static Routing. Select your
current WAN Interface and click Save.
4. Click Add to add a new static routing entry. Finish the settings
according to the following explanations:
How can I
do that?