14
2.
Click Start, the PharOS will begin to analyze the power of frequency
.
Observe the curves for a period of time, and then click stop. Note
that the relatively low and continuous part of the average curve
indicates less radio noise. Here, we use the figure below as an
example.
3.
When choosing channel/frequency, you should avoid the spectrum
with large radio noise. In this example, the recommended channel/
frequency is 1/2412MHz and 6/2437MHz.
WBS510 has a select box of Frequency Range at the top-left corner. Select the
required range and then click Start .
Log in to PharOS, click Spectrum Analysis in the tools drop-down
list,
a window will pop up to remind you that all wireless connections
will be lost during spectrum analysis. Click Yes to continue to the
Spectrum Analysis page.
1.
How can I use Spectrum Analysis to find the
appropriate channel for the devices?
Q3.
About Support Log Out
Ping
Traceroute
Speed Test
Survey
Spectrum Analysis
Tools
2402 2412 2422 2432 2442 2452 2462 2472 2482
Frequency(MHz)
Power(dBm)
-10
-25
-40
-55
-70
-85
-100
-115
-130
peak current average
To Next Page
Loading...
