13
FAQ
How to restore the Base Station to its factory
default settings?
With the Base Station powered on, press and hold the RESET
button on the Base Station or the Remote Reset button on the
passive PoE adapter for about 8 seconds until the Wireless Signal
Strength LEDs flash.
What is Pharos MAXtream?
Pharos MAXtream is a proprietary protocol developed on the
basis of Time Division Multiple Access (TDMA) by TP-LINK.
The MAXtream technology has the following advantages:
By dividing the timing of transmission into different time slots,
MAXtream allows the Pharos devices to transmit in rapid
succession, one after another, each using its own time slot to
transmit and receive they own frames, which greatly reduces the
chance of collision.
Pharos MAXtream is a non-standard Wi-Fi protocol that is only
compatible with TP-LINK’s Pharos series products. Please notice
that you will not be able to connect other Wi-Fi devices to an AP
with MAXtream enabled.
Eliminates hidden node collisions & improves channel efficiency.
Lower latency, higher throughput, larger network capacity & more
stability.
Improves the QoS for video, voice and sound data stream
Q2.
Q1.
To Next Page
Loading...
