CALIBRATION & SERVICE
It is recommended that your analyzer be calibrated every 12 months. Please
consult Test Products International for further details or send your analyzer
to the address below for service.
TPI / Attn. Service
9615 SW Allen Blvd. Suite 104
Beaverton, OR 97005
The following are consumable parts for the instrument:
In-Line Filter Element (pkg of 5) User Replaceable A762F
Water Block Filter User Replaceable A794W
Mini Pump Protection Filter Assem. User Replaceable A763
**Oxygen Sensor User / Factory Replaceable A761S
**Carbon Monoxide Sensor User / Factory Replaceable A760S
**Sensor replacement requires calibration gas.
Sensors for the DC710 can be replaced in the field. Please see appendix C
for the replacement procedure.
Factor
y calibration is recommended once per year.
WARRANTY
Your TPI DC710 Flue Gas Analyzer is guaranteed free from defects in materi-
als and workmanship for 3 Years from the date of purchase. This guarantee
does not affect your statuary rights. For additional information please refer to
the included warranty card or contact TPI at 800-368-5719.
To obtain warranty performance or maintenance on your analyzer: - Include
with the product your name, address, phone number, written description of
the problem and proof of purchase date. Carefully package and return to:
TPI / Attn. Service
9615 SW Allen Blvd. Suite 104
Beaverton, OR 97005
19
To Next Page
Loading...
Need help?
General
