T+A HV Series - Page 58

58
Menu Point
Description
MAC
The MAC address is a hardware address which uniquely identifies your
machine. The address displayed is determined by the manufacturer, and
cannot be altered.
Connection state
Shows the connection state: WLAN, LAN or not connected.
Interface
Here you can select whether the device should be connected via WLAN or
LAN.
DHCP
ON
If your network includes a DHCP server, please select the ON setting at this
point. In this mode an IP address is automatically assigned to the
SDV 3100 HV by the router. The screen shows only the MAC address and the
message DHCP state ON. In this case the address input fields shown in the
illustration do not appear in the menu.
OFF
If your network does not include a DHCP server, please select the OFF setting.
In this mode you must configure the following network settings manually.
Please ask your network administrator for the addresses to be entered for
your network.
IP
IP address of the SDV 3100 HV
Subnet mask
Network mask
Gateway
IP address of the router
DNS
Name / IP of the name server (optional)
Store and exit?
Stores the network parameters, and restarts the SDV 3100 HV with the new
settings.
Discard and exit?
Closes the menu: data already entered is discarded.