TR-Electronic CD-75 Series - Applied Directives and Standards

Printed in the Federal Republic of Germany  TR-Electronic GmbH 2009, All Rights Reserved
12/13/2018 TR - ECE - BA - DGB - 0070 - 17 Page 61 of 108
1.2 Applied directives and standards
The measuring systems in series CD_-75 have been developed, designed and manufactured taking
account of the applicable European and international standards, directives and requirements.
Directives
- 2004/108/EC (L 390/24), until 04/19/16
EMC Directive
- 2014/30/EU (L 96/79), from 04/20/16
EMC; Immunity to disturbance according to EN 61000-6-2, industrial environments:
- DIN EN 61000-4-2:2009 Electrostatic discharge, ESD
- DIN EN 61000-4-3:2008 Radio-frequency electromagnetic fields
- DIN EN 61000-4-4:2005 Fast transient electrical disturbances, burst
- DIN EN 61000-4-5:2007 Surge
- DIN EN 61000-4-6:2009
Immunity to conducted disturbances,
induced by radio-frequency fields
- DIN EN 61000-4-29:2001
Voltage dips, short interruptions and voltage
variations on D.C. input power ports
EMC; Transient emissions according to EN 61000-6-3, residential environments:
- EN 55022:2006 Disturbance field strength, 30 MHz - 1 GHz
- EN 55022:2006 Interference current, < 30 MHz
- DIN EN 61326-3-2:2008
Immunity to disturbance requirements for safety-
related systems and for devices
Safety
- DIN EN 61508 Part 1-7
- VDE 0803
Functional safety
- EN 61800-5-2
Adjustable speed electrical power drive systems;
Safety requirements - Functional
- EN 60204-1
Safety of machinery - Electrical equipment of
machines - Part 1: General requirements
- EN 62061, Appendix E
Safety of machinery - Functional safety of safety-
related E/E/PE control systems
- EN ISO 13849-1
Safety of machinery - Safety-related parts of control
systems
- DIN EN 954-1:1996
Safety of machinery - Safety-related parts of control
systems
- DIN EN 292-2:1995 Safety of machinery
- DIN EN 418:1993 Safety of machinery; Emergency stop equipments
Environmental influences
- DIN EN 60068-2-6:2008 Vibration, sinusoidal
- DIN EN 60068-2-64:2009 Broadband random
- DIN EN 60068-2-27:2010 Single shock
- DIN EN 60068-2-29:1995 Shock
- DIN EN 60529:2014 Degrees of protection, IP code