39
General Maintenance
NOTE: Proper maintenance of the ATV is important for opti-
mum performance. Follow the Maintenance Schedule and all
ensuing maintenance and care instructions/information.
NOTE: Proper maintenance procedures for each item can
be found on the corresponding page indicated.
If, at any time, abnormal noises, vibrations, or improper functioning of
any component of this ATV is detected, DO NOT OPERATE THE ATV.
Take the ATV to an authorized dealer for inspection and adjustment or
repair.
A repair shop or person of the owner's choosing may maintain, replace,
or repair emission-control devices and systems.
If the owner/operator does not feel qualified to perform any of these
maintenance procedures or checks, take the ATV to an authorized dealer
for professional service.
I = Inspect and clean, adjust, lubricate, replace as necessary C = Clean
L = Lubricate R = Replace T = Tighten A = Adjust
* = Dealer maintenance ** = When using ACX All Weather Synthetic oil, oil change
interval can be increased to every 1,000 miles or every year.
Maintenance Schedule
Item Page
Initial
Service
(100
Miles)
Monthly Quarterly Annually
Air filter
47 II
Battery
43 II I
*Brake components
41 I Inspect every time before riding
Brake light/headlights
48 I Inspect every time before riding
Carburetor float bowl
35 IC
Chassis nuts and bolts
— IT T T
*Drive chain
— II
Electrical connections
— II
Transmission lubricant
41 RI
Engine oil
40 RR**I
Fuel filter/tube
— II
Idle RPM
46 II
Chassis
— C, L I
Shock absorbers
40 I
Spark plug
46 C
*Steering
— I Inspect every time before riding
*Suspension (Front tie
rods/protective boots)
42 I Inspect every time before riding
Tires/air pressure
48/26 I Inspect every time before riding
Tire wear
48 II
Throttle cable
47 I Inspect every time before riding
Parking brake
42 II, A
To Next Page
Loading...