BlueTOAD Spectra Deployment
TrafficCast Quick StartāBlueTOAD Spectra and Spectra RSU
Revision 02 May 2019 2-3
d. To change any of the fields in the System Settings area:
i. Enter the new value into each field.
Note: For a helpful workbook to keep a record of the values in each field, go to
https://trafficcast.zendesk.com/hc/en-us/articles/360015177732-Preprogramming-
installation-cheat-sheet
In the middle left of the page, select BlueTOAD Programming Cheat Sheet.xlsx
At the bottom left of the Excel page, select the Pre Installation Sheet tab.
ii. When done, click Submit Changes.
Important: If you change the IP address, keep a record of the new BlueTOAD
Spectra IP address because you must use the new IP address to log back into this
same device! Without the correct IP, you CANNOT log in.
iii. The BlueTOAD Spectra resets automatically.
To Next Page
Loading...