Appendix—How to Manually Configure a BlueTOAD Spectra RSU
TrafficCast Quick Start—BlueTOAD Spectra and Spectra RSU
5-4 Revision 02 May 2019
3. Open PuTTY to start an SSH session into the RSU. Set the Host Name to root@192.168.1.76, Port
to 22, Connection Type to SSH, and save the session as “DefaultRSU” for future use.
4. If prompted to accept the RSA key of the RSU click Yes.
5. Once the BASH shell is available, use the command “shutdown” to Restart and Apply the
configuration changes to the RSU.
To Next Page