27
OPERATION DETAILS
Malfunction
Please read and understand following details regarding this air conditioner.
Temperature and Humidity Range
Auto Restart
Permissible ranges of temperature and humidity are as follows:
Nearby lighting or use of a mobile radio (short wave, etc.)
may result in malfunction. In this case, disconnect the power
plug from its outlet and connect it again, then use the remote
control unit to resume operation.
¡·
Auto Restant function is available after professional
modification.
¡·
The air conditioner power has been interrupted by a power
failure. The air conditioner will then restart automatically in
auto mode.
¡·
If a power failure occurs during timer operation, the timer
will be reset and the unit will begin (or stop) operation at
the new time setting.
If the unit is used under higher temperature conditions than
those noted here, the automatic protection circuit may
operate, interrupting the operation. If the unit is used under
lower temperature conditions than those noted here, the heat
exchanger may freeze, causing water leakage or other
malfunction.
¡·
Do not use the air conditioner for any purpose other than
room cooling, room drying or fan.
Outdoor temperature:
About 18¢J to 43¢J
Indoor temperature:
About 18¢J to 32¢J
Indoor humidity:
About 80¢H or less. If the unit is used for long
periods under conditions of high humidity,
water may condense on and drip from the
surface of the unit.
Outdoor temperature:
About 18¢J to 43¢J
Indoor temperature:
About 18¢J to 32¢J
Indoor humidity:
If the unit is used for long periods under
conditions of high humidity, water may
condense on and drip from the surface of the
unit.
Cooling
Operation
Drying
Operation
To Previous Page
Loading...
Need help?
General
