16
2-way/3-way
OFF
¡
I
Temperature
decreasing
Setting temp
¡ˇ1¢J
ON
OFF
Setting
temp
ON
Setting temp
¡—1¢J
MODE OPERATION (COOL ,DRY , FAN , HEAT )
To Stop Operation
Press the POWER ON /OFF button.
Temperature
decreasing
Temperature
increasing
Setting temp
-1¢J
Pause
Weak
warm
Setting temp
-3¢J
Pause
¡ M
Weak
warm
¡ Tb
Setting temp
¡ˇ1¢J
Setting temp
-2¢J
¡ L
Middle
warm
Setting temp
-4¢J
¡ Ta
¡ I
Strong
warm
Setting temp
¡—5¢J
¡ T2
¡ T1
Middle
warm
Strong
warm
Temperature difference :
¡ T1=¡ Ta=3.0¡ 0.5¢J
¡ T2=¡ Tb=2.0¡ 0.5¢J
Temperature arrear :
¡ I=¡ L=¡ M=1.0¡ 0.5¢J
HEAT MODE
1.2-way /3-way operates when POWER ON, fan won't
operate till thermostat temperature ¡ 35¢J( to prevent cool
air blowing out, uncomfortness caused ). Showed as the
figure.
2.When POWER OFF, fan won't stop operating till thermostat
temperature ¡ 34¢J. Showed as the figure.
3.In heat, fan speed will change automatically , depends to
thermostat temperature changed due to outside
temperature or unit situation changed.
1When the fan speed set to "AUTO" HEAT mode
operation is as below:
Temperature
increasing
Temperature
arrear :
¡ I=2.0¡ 0.5¢J
2When the fan speed controlled by manual, mode
operation is as below:
35¢J 43¢J
34¢J 37¢J
Fan off Low Fan speed setting