WSHP-SVX022A-EN
5
Model Number Description
Digit 1, 2, 3 — Unit Configuration
GEC = High Efficiency Console
Digit 4 — Unit Configuration
K = R-454B
Digit 5, 6, 7 — Nominal Capacity
006 = 0.5 Tons
009 = 0.75 Tons
012 = 1 Tons
015 = 1.25 Tons
018 = 1.5 Tons
Digit 8 — Voltage Volts/Hz/Phase
1 = 208/60/1
2 = 230/60/1
7 = 265/60/1
Digit 9 — Heat Exchanger
1 = Copper-Water Coil
2 = Cupro-Nickel Water Coil
Digit 10 — Design Sequence
A
Digit 11— Refrigeration Circuit
0 = Heating and Cooling Circuit
2 = Heating and Cooling Circuit with Hot Gas
Reheat
Digit 12 — Blower Configuration
1 = Standard Blower Motor
Digit 13 — Freeze Protection
A = 20° Freezestat (For Glycol Loop) (Extended
Range Geothermal)
B = 35° Freezestat (For Water Loop)
Digit 14 — Open Digit
0 = Open Digit
S = Design Special
Digit 15 — Supply-Air Arrangement
0 = Standard Supply-Air Arrangement
Digit 16 — Return-Air Arrangement
0 = Standard Return-Air Arrangement
Digit 17 — Control Types
D = Deluxe 24V Controls
E = Deluxe 24V Control with Programmable
Thermostat
H = Symbio™ 400-B
J = Symbio 400-B with Air-Fi® Wireless
Communications
Digit 18 — Tstat/Sensor Location
0 = Wall Mounted Location
1 = Unit Mounted Location with Standard Entry
2 = Unit Mounted Location with Keylock Entry
Digit 19 — Fault Sensors
1 = Condensate Overflow Sensor
3 = Condensate Overflow and Filter Maintenance
Timer
6 = Condensate Overflow and Fan Status
J = Condensate Overflow Sensor, Fan Status and
Filter Maintenance Timer
Digit 20 — Temperature Sensor
0 = No Additional Temperature Sensor
1 = Entering Water Sensor
Digit 21 — Open Digit
0 = Open Digit
Digit 22 — Electric Heat
0 = No Electric Heat
2 = Boilerless Control Electric Heat (minimum)
3 = Boilerless Control Electric Heat (maximum)
Digit 23 — Unit Mounted Disconnect
0 = No Unit Mounted Disconnect
A = Power Cord/Receptacle Box
B = Power Cord/Receptacle Box with Circuit
Breaker
C = On/Off Toggle Switch
Digit 24 — Filter Type
0 = No Filter; Chassis Only
1 = 1-inch Throwaway Filter
A = 1-inch MERV 8 Filter
Digit 25 — Acoustic Arrangement
0 = Enhanced Sound Attenuation
Digit 26— Factory Configuration
0 = Standard Factory Configuration (Chassis,
Cabinet, and Subbase)
2 = Low Height Factory Configuration (Chassis,
Cabinet, and Subbase)
3 = Extended Length Factory Configuration
(Chassis, Cabinet, and Subbase)
4 = Low Height Factory Configuration Retrofit
(Chassis, Subbase)
5 = Standard Height Factory Configuration Retrofit
(Chassis, Subbase)
Digit 27 — Paint Color
0 = No Paint Selection Available
1 = Deluxe Beige
2 = Cameo White
3 = Soft Dove
Digit 28 — Outside Air
0 = No Outside Air Option
1 = Outside Air Opening
2 = Motorized Outside Air (2-position)
Digit 29 — Piping Arrangement
L = Left Hand Piping Arrangement
R = Right Hand Piping Arrangement
Digit 30, 31, 32, 33, 34, 35, 36 — Does Not
Apply to GEC
0000000 = Digits 30-36 are not applicable to the
GEC product
To Next Page
Loading...
