Need help?Do you have a question about the Trane GECA -006 and is the answer not in the manual?
Details the Axiom™ Console Configuration for Water-Source Comfort System Model GEC.
Lists the available GECA models by frequency (60 HZ and 50 HZ).
Overview of the GECA water-source comfort system features and benefits.
Steps for inspecting the unit upon arrival and before accepting delivery.
Recommendations for proper indoor or outdoor storage of the unit.
Specifies required clearances around the unit for servicing and maintenance.
Steps for removing packaging and inspecting the unit upon arrival.
Instructions for securing the unit chassis to the wall.
Procedure for detaching the unit chassis from its subbase.
Installing the wall flange and mounting disconnect boxes.
Guidance on power wiring for disconnect options.
Checking alignment, water connection angles, and field piping.
Importance of cleaning system piping to prevent unit damage.
Attaching hoses and connecting the condensate drain line.
Guidance on power and low voltage wiring connections.
Guidelines for thermostat placement and unit-mounted controls.
Connecting receptacle plugs and details on the factory-installed pump kit.
Performance data tables for GECA units without pump kits.
Electrical data for units with pump kits and information about the kit.
Step-by-step guide for starting up the unit with a conventional thermostat.
Table detailing operating pressures for cooling and heating.
Tables showing water pressure drops and volumes for GECA units.
Suggestions for routine unit maintenance and water quality checks.
Detailed steps for replacing filters on different unit configurations.
Details on the duration and coverage of Trane's warranties.
Explanation of diagnostic LED indicators for troubleshooting.
Schematic for basic unit wiring on 115V/60HZ/1PH.
Schematic for basic unit wiring on 220-240V/50HZ/1PH.
Schematic for deluxe unit wiring on 230V/60HZ/1PH.
Schematic for Tracer ZN510 unit wiring on 265V/60HZ/1PH.
To Next Page
General
