Installation
SO-SVN048A-EN 37
Note: See “Dimensions,” p. 9 for conduit location
dimensions.
Panel Component Installation
(All Kits)
Install the following components listed in Table 8 at the
approximate locations as shown in Figure 38.
43
Table 8. AFD panel component installation
Index Description Qty
1 SUPPORT, CHOKE CORE 1
2 DIN RAIL, 4 in. 1
3 FUSE HOLDER, 1F1-1F3 – REUSE (4 to 5 amp) 1
4 DIN RAIL END-STOP 4
5 BUSS BAR, STRAIGHT 1
6 BUSS BAR, FORMED 2
7 RELAY SOCKET, 4PDT (for relays 1K14 and 1K15) 2
8 RELAY, 4PDT, 8A (relays 1K14 and 1K15) 2
9 Dual Relay Output 1A8 1
10 FUSE HOLDER, 1F4-1F6 – REUSE (6 to 10 amp) 1
11 DIN RAIL, 7.5 in. REUSE 1
Note: Items 3, 10, and 11 already exist and are re-used.
Figure 38. Panel component installation locations
To Next Page
Loading...
