78
CTV-SVU01G-EN
Table 52. Motor settings and status points
Active Current Limit Setpoint Starter Input Voltage BC CktX
Average Motor Current % RLA CktX Starter Input Voltage CA Ck
Motor Frequency CktX Motor Winding Temperature 1 CktX
Frequency Command CktX Motor Winding Temperature 2 CktX
Starter Motor Current L1 % RLA CktX
Motor Winding Temperature 3 CktX
Starter Motor Current L2 % RLA CktX
Motor Temperature CktX
Starter Motor Current L3 % RLA CktX
Motor Speed CktX
Starter Motor Current L1 CktX Starter
AFD Transistor Temperature CktX
Motor Current L2 CktXStarter
AFD Input Frequency
Motor Current L3 CktX
Starter Input Power Consumption CktX
AFD Input Current L1 CktX
Starter Power Demand CktX Starter Motor Power Factor CktX
AFD Input Current L2 CktXAFD AFD Output Power CktX
Input Current L3 CktX AFD Average Input Current CktX
AFD Output Voltage CktX Starter Energy Consump. Resettable CktX
AFD DC Bus Voltage CktX Starter Energy Consump. Non Reset CktX
AFD DC Bus Current CktX
Starter Energy Consump. Time of Last Reset CktX
Starter Input Voltage AB CktX
Table 53. Purge settings and status points
Purge Top Level Mode (button links to Purge Operating Modes screen)
(Ckt1 and Ckt2)
Pumpout Chiller On—7 days (Ckt1 and Ckt2)
Purge Regen Cycle (button links to PUrge Regen Cycle) (Ckt1 and
Ckt2)
Pumpout Chiller Off—7 days (Ckt1 and Ckt2)
Purge Fault Indicator (button links to Alarms screen) (Ckt1 and Ckt2) Time Until Next Purge Run (Ckt1 and Ckt2)
Daily Pumpout—24 Hours (Ckt1 and Ckt2) Purge Rfgt Compressor Suction Temp (Ckt1 and Ckt2)
Average Daily Pumpout—7 Days (Ckt1 and Ckt2) Purge Liquid Temperature (Ckt1 and Ckt2)
Daily Pumpout Limit (Ckt1 and Ckt2) Pumpout—Life (Ckt1 and Ckt2)
Chiller On—7 Days (Ckt1 and Ckt2) Purge Carbon Tank Temp (Ckt1 and Ckt2)
Reports
The following data can be viewed on the Reports screen. For more information, refer to
“Reports,” p. 23.
AAppppeennddiixx BB:: DDaattaa ffoorr CCeennTTrraaVVaacc DDuupplleexx CChhiilllleerrss
To Next Page
Loading...
Need help?
General
