Trane Tracer UC600 Installation Guide

10
BAS-SVP042A-EN
Checkout
Procedure Measurement
Expected Value
Step 1
Measure AC voltage across the resistive
termination.
Vac ≈ 0.0 V
AC voltage will affect further
measurement.
Step 2
Measure DC voltage across the resistive
termination.
Vdc ≈ 0.0 V
DC voltage will affect further
measurement.
Step 3
Measure the resistance across the resistive
termination.
contact open = infinity (∞)
contact closed = shorted (0 Ω)
TTrraacceerr UUCC660000 PPrree--ppoowweerr CChheecckkss

Trane Tracer UC600 Specifications

General

Brand	Trane
Model	Tracer UC600
Category	Controller
Language	English