Trane Tracer ZN511 - Dimensions and Clearances

Chapter 1 Overview and specifications
2 CNT-SVX06B-EN
Agency listing/compliance
CE—Immunity: EN 50082-1:1997; EN 50082-2:1995
CE—Emissions: EN 50081-1:1992 (CISPR 22) Class B
UL and C-UL 916 listed: Energy management system
UL 94-5V (UL flammability rating for plenum use)
FCC Part 15, Class A
Dimensions
Plastic-cover model dimensions
For complete dimensional drawing, see Figure 1 on page 3.
• Height: 5.375 in. (137 mm)
• Width: 6.875 in. (175 mm)
• Depth: 2 in. (51 mm)
Metal-cover model dimensions
For complete dimensional drawing, see Figure 2 on page 3.
• Height: 9.0 in (25 mm)
• Width: 10.37in. (263 mm)
• Depth: 2.25 in. (58 mm)
Clearances
For wiring, ventilation, and maintenance, provide the following minimum
clearances for the controller:
Plastic-cover model
• Front: 4.0 in. (102 mm)
• Each side: 1.0 in. (25 mm)
• Top and bottom: 4.0 in. (102 mm)
Metal-cover model
• Front: 24.0 in. (610 mm)
• Each side: 2.0 in. (51 mm)
• Top and bottom: 1.0 in. (25 mm)