Transcend Micro User Manual

Page 7
Setting Up and Starting Therapy
AirFlex™ air hose connection
1. Connect the air hose firmly to the air flow outlet on the device by inserting the air
hose coupler into the air outlet on the device.
2. Locate the arrow on the air hose coupler and arrow on the device.
3. Align the arrows and gently insert at a slight angle and twist the air hose coupler
clockwise until you feel it begin to insert. Continue twisting until the air hose
connector is seated securely into the device. The image below indicates a fully
secured hose with the hose arrow below the parting line of the device.
4. Connect the mask to opposite end of the air hose.
NOTE: The hose is the applied part and constitutes the air pathway.
a
b
c
d
a. Transcend Micro device
b. Air flow outlet
c. Air hose coupler
d. AirFlex air hose

Transcend Micro Specifications

General

Brand	Transcend
Product	Micro
Pressure Range	4-20 cmH2O
Altitude Adjustment	Automatic
Operating Modes	CPAP