Transition Networks SISTM1040-262D-LRT - Port-Based Priority; COS Configuration; TOS Configuration

24-Hour Technical Support: 1-800-260-1312 International: 00-1-952-941-7600
101
6.21.2 Port-based Priority
Configure the priority level for each port. With the drop-down selection item of Priority
Type above being selected as Port-based, this control item will then be available to set
the queuing policy for each port.
 Port x: Each port has 4 priority levels—High, Middle, Low, and Lowest—to be
chosen.
 Click
Apply
to have the configuration take effect.
6.21.3 COS Configuration
Set up the COS priority level. With the drop-down selection item of Priority Type above
being selected as COS only/COS first, this control item will then be available to set the
queuing policy for each port.
 COS priority: Set up the COS priority level 0~7—High, Middle, Low, Lowest.
 Click
Apply
.
6.21.4 TOS Configuration
Set up the TOS priority. With the drop-down selection item of Priority Type above being
selected as TOS only/TOS first, this control item will then be available to set the queuing
policy for each port.
 TOS priority: The system provides 0~63 TOS priority level. Each level has 4 types