Transition Networks SISTM1040-262D-LRT - IGMP Commands Set

24-Hour Technical Support: 1-800-260-1312 International: 00-1-952-941-7600
137
[weighted-fair|strict] scheduling weighted-fair
qos prioritytype
[port-based|cos-
only|tos-only|cos-
first|tos-first]
G
Setting of QOS priority
type
switch(config)#qos prioritytype
qos priority portbased
[Port]
[lowest|low|middle|high]
G Configure Port-based
Priority
switch(config)#qos priority
portbased 1 low
qos priority cos
[Priority][lowest|low|mid
dle|high]
G Configure COS
Priority
switch(config)#qos priority cos 0
middle
qos priority tos
[Priority][lowest|low|mid
dle|high]
G Configure TOS Priority
switch(config)#
qos priority tos 3
high
show qos P Displays the
information of QoS
configuration
Switch#
show qos
no qos G Disable QoS function
switch(config)#
no qos
IGMP Commands Set
Commands Level Description Example
igmp enable G Enable IGMP
snooping function
switch(config)#igmp enable
igmp-query auto G Set IGMP query to
auto mode
switch(config)#igmp-query auto
Igmp-query force G Set IGMP query to
force mode
switch(config)#igmp-query force
show igmp
configuration
P Displays the details of
an IGMP
configuration.
switch#show igmp configuration
no igmp G Disable IGMP
snooping function
switch(config)#no igmp