Transition Networks SISTM1040-262D-LRT
24-Hour Technical Support: 1-800-260-1312 International: 00-1-952-941-7600
17
3.4 Wiring the Power Inputs
Please follow the steps below to insert the power wires.
1. Insert DC power wires into the contacts 1 and 2 for power 1, or 5 and 6 for power.
2. Tighten the wire-clamp screws for preventing the wires from loosing.
[NOTE] The wire gauge for the terminal block should be in the range between 12 ~ 24
AWG.
To Next Page
Loading...