Transition Networks SISTM1040-262D-LRT - Port Mirroring Commands Set

24-Hour Technical Support: 1-800-260-1312 International: 00-1-952-941-7600
141
[Group Name ]
security-level
[NoAuthNoPriv|AuthNoP
riv|AuthPriv]
match-rule
[Exact|Prifix]
views
[Read View Name]
[Write View Name]
[Notify View Name]
V1
no snmpv3 mibview
view
[View Name]
type
[Excluded|Included]
sub-oid
[OID]
G Remove specified
mibview table of
SNMPV3 agent.
switch(config)#no snmpv3
mibview view V1 type Excluded
sub-oid 1.3.6.1
Port Mirroring Commands Set
Commands Level Description Example
monitor
[RX|TX|Both]
I Configure source port
of monitor function
switch(config)#interface
fastEthernet 2
switch(config-if)#monitor RX
monitor rx [Port ID] G Set RX destination
port of monitor
function
switch(config)#monitor rx 2
monitor tx [Port ID] G Set TX destination
port of monitor
function
switch(config)#monitor tx 3
show monitor P Show port monitor
information
switch#show monitor