Transition Networks SISTM1040-262D-LRT - MAC Address Table; Static MAC Address

Transition Networks SISTM1040-262D-LRT
24-Hour Technical Support: 1-800-260-1312 International: 00-1-952-941-7600
113
6.25 MAC Address Table
Use the MAC address table to ensure the port security.
6.26.1 Static MAC Address
You can add a static MAC address that remains in the switch's address table regardless
of whether the device is physically connected to the switch. This saves the switch from
having to re-learn a device's MAC address when the disconnected or powered-off device
is active on the network again. Via this interface, you can add / modify / delete a static
MAC address.
Add the Static MAC Address
You can add static MAC address in the switch MAC table here.
 MAC Address: Enter the MAC address of the port that should permanently forward
traffic, regardless of the device network activity.
 Port No.: Pull down the selection menu to select the port number.
 Click
Add
.
 If you want to delete the MAC address from filtering table, select the MAC address
and click
Delete
.