Transition Networks SISTM1040-262D-LRT - SNMP Commands Set

24-Hour Technical Support: 1-800-260-1312 International: 00-1-952-941-7600
139
SNMP Commands Set
Commands Level Description Example
snmp system-name
[System Name]
G Set SNMP agent
system name
switch(config)#snmp system-
name l2switch
snmp system-location
[System Location]
G Set SNMP agent
system location
switch(config)#snmp system-
location lab
snmp system-contact
[System Contact]
G Set SNMP agent
system contact
switch(config)#snmp system-
contact where
snmp agent-mode
[v1v2c|v3|v1v2cv3]
G
Select the agent mode
of SNMP
switch(config)#snmp agent-mode
v1v2cv3
snmp community-
strings [Community]
right
[RO/RW]
G
Add SNMP community
string.
switch(config)#snmp community-
strings public right rw
snmp-server host
[IP address]
community
[Community-string]
trap-version
[v1|v2c]
G Configure SNMP
server host
information and
community string
switch(config)#snmp-server host
192.168.1.50 community public
trap-version v1
(remove)
Switch(config)#
no snmp-server host
192.168.1.50
snmpv3 context-name
[Context Name ]
G Configure the context
name
switch(config)#snmpv3 context-
name Test
snmpv3 user
[User Name]
group
[Group Name]
password
[Authentication
Password] [Privacy
Password]
G Configure the
userprofile for
SNMPV3 agent.
Privacy password
could be empty.
switch(config)#snmpv3 user
test01 group G1 password
AuthPW PrivPW