Transition Networks SISTM1040-262D-LRT
24-Hour Technical Support: 1-800-260-1312 International: 00-1-952-941-7600
80
6.18.1 Port-based VLAN
A port-based VLAN basically consists of its members—ports, which means the VLAN
is created by grouping the selected ports. This method provides the convenience for
users to configure a simple VLAN easily without complicated steps. Packets can go
among only members of the same VLAN group. Note all unselected ports are treated
as belonging to another single VLAN. If the port-based VLAN enabled, the VLAN-
tagging is ignored. The port-based VLAN function allows the user to create separate
VLANs to limit the unnecessary packet flooding; however, for the purpose of sharing
resource, a single port called a common port can belongs to different VLANs, which
all the member devices (ports) in different VLANs have the permission to access the
common port while they still cannot communicate with each other in different VLANs.
VLAN – Port Based interface
Pull down the selection item and focus on
Port Based
then press
Apply
to set
the VLAN Operation Mode in
Port Based
mode.
To Next Page
Loading...