Transition Networks SISTM1040-262D-LRT - Page 133

24-Hour Technical Support: 1-800-260-1312 International: 00-1-952-941-7600
126
mask] [Gateway] 192.168.1.254
ip dhcp G Enable DHCP client
function of switch
switch(config)#ip dhcp
show ip P
Show IP information of
switch
switch#show ip
no ip dhcp G Disable DHCP client
function of switch
switch(config)#no ip dhcp
reload G
Halt and perform a cold
restart
switch(config)#reload
default G Restore to default switch(config)#default
admin username
[Username]
G Changes a login
username.
(maximum 10 words)
switch(config)#admin username
xxxxxx
admin password
[Password]
G Specifies a password
(maximum 10 words)
switch(config)#admin password
xxxxxx
show admin P Show administrator
information
switch#show admin
dhcpserver enable G Enable DHCP Server switch(config)#dhcpserver enable
dhcpserver disable G Disable DHCP Server switch(config)#no dhcpserver
dhcpserver lowip
[Low IP]
G Configure low IP
address for IP pool
switch(config)#dhcpserver lowip
192.168.1.100
dhcpserver highip
[High IP]
G Configure high IP
address for IP pool
switch(config)#dhcpserver highip
192.168.1.200
dhcpserver subnetmask
[Subnet mask]
G Configure subnet
mask for DHCP clients
switch(config)#dhcpserver
subnetmask 255.255.255.0
dhcpserver gateway
[Gateway]
G Configure gateway for
DHCP clients
switch(config)#dhcpserver
gateway 192.168.1.254
dhcpserver dnsip
[DNS IP]
G Configure DNS IP for
DHCP clients
switch(config)#dhcpserver dnsip
192.168.1.1
dhcpserver leasetime
[Hours]
G Configure lease time
(in hour)
switch(config)#dhcpserver
leasetime 1
dhcpserver ipbinding I Set static IP for DHCP switch(config)#interface