Transition Networks SISTM1040-262D-LRT - Page 153

24-Hour Technical Support: 1-800-260-1312 International: 00-1-952-941-7600
146
of SMTP
no smtp G Disable SMTP
function
switch(config)#no smtp
event device-cold-start
[Systemlog|SMTP|Both]
G Set cold start event
type
switch(config)#event device-cold-
start both
event authentication-
failure
[Systemlog|SMTP|Both]
G Set Authentication
failure event type
switch(config)#event
authentication-failure both
event ring-topology-
change
[Systemlog|SMTP|Both]
G Set X-ring topology
changed event type
switch(config)#event ring-
topology-change both
event systemlog
[Link-UP|Link-
Down|Both]
I Set port event for
system log
switch(config)#interface
fastethernet 3
switch(config-if)#event systemlog
both
event smtp
[Link-UP|Link-
Down|Both]
I Set port event for
SMTP
switch(config)#interface
fastethernet 3
switch(config-if)#event smtp both
show event P Show event selection switch#show event
no event device-cold-
start
G Disable cold start
event type
switch(config)#no event device-
cold-start
no event authentication-
failure
G Disable Authentication
failure event type
switch(config)#no event
authentication-failure
no event ring-topology-
change
G Disable X-ring
topology changed
event type
switch(config)#no event ring-
topology-change
no event systemlog I Disable port event for
system log
switch(config)#interface
fastethernet 3
switch(config-if)#no event
systemlog
no event smtp I Disable port event for switch(config)#interface