Transition Networks SISTM1040-262D-LRT - Page 40

24-Hour Technical Support: 1-800-260-1312 International: 00-1-952-941-7600
33
function status
• Save configuration
Global
Configuration
Enter the
configure
command
while in
privileged
EXEC mode.
switch
(config)#
To exit to
privileged
EXEC
mode, enter
exit or end
Use this mode to
configure those
parameters that are
going to be applied to
your switch.
VLAN
database
Enter the
vlan
database
command
while in
privileged
EXEC mode.
switch
(vlan)#
To exit to
user EXEC
mode, enter
exit.
Use this mode to
configure VLAN-
specific parameters.
Interface
configuration
Enter the
interface of
fast Ethernet
command
(with a
specific
interface)
while in global
configuration
mode.
switch
(config-if)#
To exit to
global
configuratio
n mode,
enter exit.
To exit to
privileged
EXEC
mode, enter
exit or end.
Use this mode to
configure parameters
for the switch and
Ethernet ports.