24-Hour Technical Support: 1-800-260-1312 International: 00-1-952-941-7600
56
WAST - West Australian
Standard
+7 hours 7 pm
CCT - China Coast,
USSR Zone 7
+8 hours 8 pm
JST - Japan Standard,
USSR Zone 8
+9 hours 9 pm
EAST - East Australian
Standard GST
Guam Standard, USSR
Zone 9
+10 hours 10 pm
IDLE -
Line
NZST - New Zealand
Standard
NZT - New Zealand
+12 hours Midnight
SNTP Sever URL: Set the SNTP server IP address. You can assign a local network
time server IP address or an internet time server IP address.
Switch Timer: When the switch has successfully connected to the SNTP server
whose IP address was assigned in the column field of SNTP Server URL, the
current coordinated time is displayed here.
Daylight Saving Period: Set up the Daylight Saving beginning date/time and
Daylight Saving ending date/time. Please key in the value in the format of
‘YYYYMMDD’ and ‘HH:MM’ (leave a space between ‘YYYYMMDD’ and ‘HH:MM’).
YYYYMMDD: an eight-digit year/month/day specification.
HH:MM: a five-digit (including a colon mark) hour/minute specification.
For example, key in ‘20070701 02:00’ and ‘20071104 02:04’ in the two column
fields respectively to represent that DST begins at 2:00 a.m. on March 11, 2007
and ends at 2:00 a.m. on November 4, 2007.
Daylight Saving Offset (mins): For non-US and European countries, specify the
amount of time for day light savings. Please key in the valid figure in the range of
To Next Page
Loading...