24-Hour Technical Support: 1-800-260-1312 International: 00-1-952-941-7600
66
Select the ports to join the trunk group. The system allows a maximum of four
ports to be aggregated in a trunk group. Click
Add
and the ports focused in
the right side will be shifted to the left side. To remove unwanted ports, select the
ports and click
Remove
.
When LACP enabled, you can configure LACP Active/Passive status for each
port on the State Activity tab.
Click
Apply
.
Use
Delete
to delete Trunk Group. Select the Group ID and click
Delete
.
Port Trunk—Aggregator Setting interface (four ports are added to the left field with LACP enabled)
To Next Page
Loading...