Traxon Butler S2 - Page 23

23
Setup Manual - Butler S2
Enable driver Set the checkmark to make the device online, remove
to set it to ofine mode = standalone mode.
Private logbook Checkmark to use a separate logbook in the Pro-
grammer. If unset, the Butler S2 messages appear in
the main log.
Alias name An arbitrary alias name to identify the Butler S2 in the
Programmer.
Comment A comment, e. g. the location or the function.
Generic
IP address The selected IP address.
DMX Output
Output Universe DMX1 The DMX universe ID in the Programmer, for which
port DMX1 of the Butler S2 is used.
Output Univers DMX2 The DMX universe ID in the Programmer, for which
port DMX2 of the Butler S2 is used
RDM
Enable for DMX1 Enable RDM for DMX1 of the Butler S2.
Enable for DMX2 Enable RDM for DMX2 of the Butler S2.
Export
First cuelist number The rst cuelist index which is sent to the Butler S2
when exporting shows.
Cuelist count The number of cuelists, that get exported.
Export Group UID The UID for the master/slave group on export.
Action Pad Not used at the moment.
The Butler S2 is now configured and can be used as DMX output engine or as
standalone engine after uploading shows.
For details about RDM and the RDM browser in the Lighting Application Suite
please see the System Manual for the LAS, available for free download from www.
traxontechnologies.com.