TRENDnet TEW-636APB User Manual

Installation
7
2. Use a standard LAN cable to connect the “LAN” port on the Wireless Access Point to a
10/100BaseT hub/switch on your LAN.
3. Connect the supplied power adapter to the Wireless Access Point and a convenient power
outlet, and power up.
4. Check the LEDs:
• The Status LED should flash, then turn OFF.
• The Power and W LA N LEDs should be ON.
For more information, refer to Front Panel LEDs in Chapter 1.

TRENDnet TEW-636APB Specifications

General

Brand	TRENDnet
Model	TEW-636APB
Category	Wireless Access Point
Language	English